Technical Issue Delta Cad/ Lazy turn

[santanna]

(10-21-2019, 11:12 PM)AlwMVMO Wrote: Sometimes I will break up an ellipse into several arcs using the "Draw a circular arc using three points" under the Circle tab.
It will give a smooth outline to an ellipse using circular arcs which most CAD/CAM will be able to use.

Also draw using THIN then go to Options menu / Drawing Data . . . and change Thin Line Thickness 
to a smaller number like .005 then you will be able to see mismatches more easily.

Hi! Thanks! Will try. Good hint!