Macro for Sprocket

[AlwMVMO]

Your last version in post #18 has only 1 Rd*0.35 near the end of the macro, the other 3 had already been changed.

I put in the inch values of the default numbers and the big radii is missing.
9.525 mm = .375 in.
6.5    mm = .256 in.
0.1    mm = .004 in.
10     mm = .394 in.

   

[quarkqq]

(10-05-2020, 09:55 PM)AlwMVMO Wrote: Your last version in post #18 has only 1 Rd*0.35 near the end of the macro, the other 3 had already been changed.

I put in the inch values of the default numbers and the big radii is missing.
9.525 mm = .375 in.
6.5    mm = .256 in.
0.1    mm = .004 in.
10     mm = .394 in.

  Ok. My mistake.