Posts: 1
Threads: 1
Joined: Nov 2008
Reputation:
1
hello,
first excuse me but english is not my first language.
I 'm beginning in deltacad and i 've got a trouble when i tried to fill a shape. I choose the colour, in line type : cross hatched area but on the drawing the shape is not filled with cross hatched.
How do i for filling a shape with hacthed pattern?
Posts: 571
Threads: 91
Joined: Sep 2008
Reputation:
4
11-27-2008, 11:12 PM
(This post was last modified: 11-27-2008, 11:27 PM by i44troll.)
Ponchau,
The "Circle" and "Shape" tabs are the only tabs that offer Hatching. The "Line" tab only offers line types. So, to make sure that you select the right combination of tabs and icons just follow this procedure.....
1) Choose the "shape" tab
2) Choose the "line type" drop-down box
3) Choose "Hatched"
a) This will open a selection box called "select hatch type"
4) By default Deltacad will display an outline around the shape. Choose "do not display outline" if you don't want one displayed.
5) Now just simply choose the hatch style that you want from the 40 different hatch icons listed.
6) Choose the shape that you want to use (while still in "shapes")
7) Simply draw the shape. The shape will be embedded with the chosen hatch style and outline (if selected)
Chris (i44troll)
Furthur Remarks.........
After reading your post again and again, it just dawned on me that you want to fill a shape that you have already drawn, correct? If this is the case what you need to do is follow this procedure.......
1) Select the "edit" tab
2) Select the "E" icon (for "edit")
3) Click on the shape you want filled
a) The "edit shape" box will appear
4) Select the "Line/Hatch Type" drop-down box
5) Choose "Hatched"
a) This will open a selection box called "select hatch type"
6) By default Deltacad will display an outline around the shape. Choose "do not display outline" if you don't want one displayed.
7) Now just simply choose the hatch style that you want from the 40 different hatch icons listed.
This should do it!
Chris