Posts: 2
Threads: 1
Joined: Nov 2009
Reputation:
0
DeltaCad instructions say several places to enter angle value but do not say how to enter the angle value. I simply want to draw a line with a given length and angle (polar coordinates), but I haven't figured out how to enter the angle value.
Posts: 571
Threads: 91
Joined: Sep 2008
Reputation:
4
Ken,
If I understand you correctly you have drawn an angled line and now you want to add dimensions to that line. I think the problem is you have to have "two" lines in order to create dimension lines and not just one angled line. Those lines are then selected under the "dimension" tab (not under the "line" tab) to create the needed dimensions. If you still have problems with this let me know and i'll upload a video tutorial on this subject.
Chris
Posts: 2
Threads: 1
Joined: Nov 2009
Reputation:
0
11-29-2009, 08:10 AM
(This post was last modified: 11-29-2009, 08:24 AM by Admin 1.)
Thanks, for your quick response. I realized that I was using the angled line function with two point instead of the angled line function with one point. It has been quite a long time since I have used DeltaCad so I am in a re-learning curve.