DeltaCad User's Group Forums › Main Forums › Request for Drawings, Symbols, Macros
Finish Code

Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Thread Modes
Finish Code
badhorse Offline
Junior Member
**
Posts: 8
Threads: 3
Joined: Mar 2019
Reputation: 0
#1
03-13-2019, 09:48 PM
Is there a quick way to add a surface finish code to the drawing of a machined part? I was surprised that I couldn't find one. Although I could have missed it.
thanks
Find
Reply
AlwMVMO Offline
Administrator
*******
Posts: 387
Threads: 54
Joined: Apr 2014
Reputation: 8
#2
03-13-2019, 11:15 PM (This post was last modified: 03-13-2019, 11:30 PM by AlwMVMO.)
I didn't see any surface finish symbols either.

Looking at the different types of symbols that are available to the engineer it would probably be hard to add them to a $30 - $40 CAD software.

If you use just one type, you could draw them up yourself and create your own symbol file. 
Then when you needed a surface finish you would just open the symbol file, pick the one you need and paste it into the drawing.

[ Guide to Surface Finish Symbols ]

Another thing missing from DeltaCad is [ Geometric Dimensioning and Tolerancing ]
Find
Reply
badhorse Offline
Junior Member
**
Posts: 8
Threads: 3
Joined: Mar 2019
Reputation: 0
#3
03-14-2019, 09:47 AM
(03-13-2019, 09:48 PM)badhorse Wrote: Is there a quick way to add a surface finish code to the drawing of a machined part? I was surprised that I couldn't find one. Although I could have missed it.
thanks

Thank you for the response.
Find
Reply


Forum Jump:


Users browsing this thread: 1 Guest(s)